ZyXEL Communications P-2302 User Manual

Page of 359
P-2302HWUDL-P1 Series User’s Guide
253
C
H A P T E R
 
 22 
System
Use this screen to set up general system settings, change the system mode, change the 
password, configure the DDNS server settings, and set the current date and time.
22.1  System Overview
22.1.1  System Name
System Name is for identification purposes. However, because some ISPs check this name 
you should enter your computer's "Computer Name". 
• In Windows 95/98 click Start, Settings, Control Panel, Network. Click the 
Identification tab, note the entry for the Computer Name field and enter it as the System 
Name
.
• In Windows 2000, click Start, Settings and Control Panel and then double-click System
Click the Network Identification tab and then the Properties button. Note the entry for 
the Computer name field and enter it as the System Name.
• In Windows XP, click Start, My Computer, View system information and then click 
the Computer Name tab. Note the entry in the Full computer name field and enter it as 
the ZyXEL Device System Name.
22.1.2  Domain Name
The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave 
this blank, the domain name obtained by DHCP from the ISP is used. While you must enter 
the host name (System Name) on each individual computer, the domain name can be assigned 
from the ZyXEL Device via DHCP.
22.1.3  General System Screen
Use this screen to change the ZyXEL Device’s mode, set up the ZyXEL Device’s system 
name, domain name, idle timeout, and administrator password. To access this screen, click 
Maintenance > System > General.