ZyXEL Communications P-2302 User Manual

 Chapter 4 Status Screens

P-2302HWUDL-P1 Series User’s Guide

To access this screen, open the Status screen (see 

), and click (Details 

...) next to Packet Statistics.

Figure 35   Packet Statistics Window

Each field is described in the following table.

Poll Interval

Enter how often you want the ZyXEL Device to update this screen, and click Set 

Interval.

Set Interval

Click this to make the ZyXEL Device update the screen based on the amount of 

time you specified in Poll Interval.

Stop

Click this to make the ZyXEL Device stop updating the screen.

Table 26   BW MGMT Monitor Window

Table 27   Packet Statistics Window

Port

This field displays each port in the ZyXEL Device.

Status

If the port is not connected to anything, this field displays Down.
If the interface uses Ethernet encapsulation, this field displays the port speed and 

the Ethernet duplex setting. Duplex settings are:
Full - The ZyXEL Device is using full-duplex Ethernet.
Half - The ZyXEL Device is using half-duplex Ethernet.
You cannot change the Ethernet duplex setting in the ZyXEL Device.
If this interface uses PPPoE encapsulation, this field displays the port speed and 

the status of the call.
Down - The connection is not available.
Dial - The ZyXEL Device is making the call.
Idle - The call is connected.
Drop - The ZyXEL Device is ending the call.
The LAN interface always uses Ethernet encapsulation. You can change the 

encapsulation of the WAN interface in Network > WAN > Internet Connection.

Tx Pkts

This field displays the number of packets the ZyXEL Device has transmitted from 

the port.