ZyXEL Communications P-661H Series User Manual

 Chapter 6 Wireless LAN

P-661H/HW Series User’s Guide

If you use the RESET button, the default (01234567) or previous saved (through the web 
configurator) Setup key is used to encrypt the settings that you want to transfer. 
Hold in the RESET button for one to five seconds. 

"

If you hold in the RESET button too long, the device will reset to the factory 
defaults!

Click the Network > Wireless LAN > OTIST. The following screen displays.

Figure 60   Wireless LAN: OTIST

The following table describes the labels in this screen.

Table 42   OTIST

Setup Key

Type an OTIST Setup Key of exactly eight ASCII characters in length. 
The default OTIST setup key is "01234567".

Note: If you change the OTIST setup key here, you must also 

make the same change on the wireless client(s).

Yes!

If you want OTIST to automatically generate a WPA-PSK, you must:
Change your security to any security other than WPA-PSK in the Wireless 

LAN > General screen.
Select the Yes! checkbox in the OTIST screen and click Start.
The wireless screen displays an auto generated WPA-PSK and is now in 

WPA-PSK security mode. 
The WPA-PSK security settings are assigned to the wireless client when you 

start OTIST.
If you already have a WPA-PSK configured in the Wireless LAN > General 

screen, and you run OTIST with Yes! selected, OTIST will use the existing 

WPA-PSK.

Start

Click Start to encrypt the wireless security data using the setup key and have 

the ZyXEL Device set the wireless client to use the same wireless settings as 

the ZyXEL Device. You must also activate and start OTIST on the wireless 

client at the same time. 
The process takes three minutes to complete.