ZyXEL Communications P-661H Series User Manual
Chapter 1 Getting To Know Your ZyXEL Device
P-661H/HW Series User’s Guide
36
Figure 3 Front Panel
The following table describes the LEDs.
1.6 Hardware Connection
Refer to the Quick Start Guide for information on hardware connection.
1.7 Splitters and Microfilters
This section describes how to connect ADSL splitters and microfilters. See your Quick Start
Guide for details on other hardware connections.
Guide for details on other hardware connections.
Table 2 Front Panel LEDs
LED
COLOR
STATUS
DESCRIPTION
POWER
Green
On
The ZyXEL Device is receiving power and functioning
properly.
Blinking
The ZyXEL Device is rebooting or performing diagnostics.
Red
On
Power to the ZyXEL Device is too low.
Off
The system is not ready or has malfunctioned.
ETHERNET
1~4
Green
On
The ZyXEL Device has a successful 10/100Mb Ethernet
connection.
Blinking
The ZyXEL Device is sending/receiving data.
Off
The LAN is not connected.
WLAN
(wireless
(wireless
devices
only)
Green
On
The ZyXEL Device is ready, but is not sending/receiving data
through the wireless LAN.
Blinking
The ZyXEL Device is sending/receiving data through the
wireless LAN.
Off
The wireless LAN is not ready or has failed.
DSL
Green
On
The DSL line is up.
Blinking
The ZyXEL Device is initializing the DSL line.
Off
The DSL line is down.
INTERNET
Green
On
The Internet connection is up.
Blinking
The ZyXEL Device is sending/receiving data.
Off
The Internet connection is down.