ZyXEL Communications P-661H Series User Manual

 Chapter 2 Introducing the Web Configurator

P-661H/HW Series User’s Guide

It is highly recommended that you periodically change the password for accessing the ZyXEL 
Device. If you didn’t change the default one after you logged in or you want to change to a 
new password again, then click Maintenance > System to display the screen as shown next. 

RxPkts 

This field displays the number of packets received on this port.

Errors

This field displays the number of error packets on this port. 

Tx B/s 

This field displays the number of bytes transmitted in the last second.

Rx B/s

This field displays the number of bytes received in the last second.

Up Time 

This field displays the elapsed time this port has been up. 

LAN Port Statistics

Interface

This field displays the type of port.

Status 

This field displays Down (line is down), Up (line is up or connected) if you're 

using Ethernet encapsulation and Down (line is down), Up (line is up or 

connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop 

(dropping a call) if you're using PPPoE encapsulation.
For the WLAN port (wireless devices only), it displays the transmission rate 

when WLAN is enabled or N/A when WLAN is disabled.

TxPkts 

This field displays the number of packets transmitted on this port.

RxPkts 

This field displays the number of packets received on this port.

Collisions

This is the number of collisions on this port.

Poll Interval(s)

Type the time interval for the browser to refresh system statistics.

Set Interval

Click this button to apply the new poll interval you entered in the Poll Interval 

field above.

Stop

Click this button to halt the refreshing of the system statistics.

Table 8   Status: Packet Statistics (continued)