ZyXEL Communications P-661H Series User Manual
Chapter 5 LAN Setup
P-661H/HW Series User’s Guide
95
The following table describes the fields in this screen.
5.3.1 Configuring Advanced LAN Setup
To edit your ZyXEL Device's advanced LAN settings, click the Advanced Setup button in the
LAN IP screen. The screen appears as shown.
LAN IP screen. The screen appears as shown.
Figure 49 Advanced LAN Setup
The following table describes the labels in this screen.
Table 30 LAN IP
LABEL
DESCRIPTION
TCP/IP
IP Address
Enter the IP address of your ZyXEL Device in dotted decimal notation, for
example, 192.168.1.1 (factory default).
IP Subnet Mask
Type the subnet mask assigned to you by your ISP (if given).
Apply
Click Apply to save your changes back to the ZyXEL Device.
Cancel
Click Cancel to begin configuring this screen afresh.
Advanced Setup
Click this button to display the Advanced LAN Setup screen and edit more
details of your LAN setup.
Table 31 Advanced LAN Setup
LABEL
DESCRIPTION
RIP & Multicast
Setup
RIP Direction
RIP (Routing Information Protocol, RFC 1058 and RFC 1389) allows a router to
exchange routing information with other routers. The RIP Direction field controls
the sending and receiving of RIP packets. Select the RIP direction from Both/In
Only/Out Only/None. When set to Both or Out Only, the ZyXEL Device will
broadcast its routing table periodically. When set to Both or In Only, it will
incorporate the RIP information that it receives; when set to None, it will not send
any RIP packets and will ignore any RIP packets received.