ZyXEL Communications P-2602H User Manual

Chapter 9 Wireless LAN

P-2602H(W)(L)-DxA User’s Guide

The following table describes the wireless LAN security labels in this screen.

In order to configure and enable WPA(2)-PSK authentication; click Network > Wireless 
LAN to display the General screen. Select WPA-PSK or WPA2-PSK from the Security 
Mode list.

Figure 65   Wireless: WPA(2)-PSK

The following table describes the wireless LAN security labels in this screen.

Table 35   Wireless: Static WEP Encryption

Security Mode

Choose Static WEP from the drop-down list box.

Passphrase

Enter a Passphrase (up to 32 printable characters) and clicking Generate. The 

ZyXEL Device automatically generates a WEP key.

WEP Key

The WEP key is used to encrypt data. Both the ZyXEL Device and the wireless 

stations must use the same WEP key for data transmission.
If you want to manually set the WEP key, enter any 5, 13 or 29 characters (ASCII 

string) or 10, 26 or 58 hexadecimal characters ("0-9", "A-F") for a 64-bit, 128-bit or 

256-bit WEP key respectively.

Table 36   Wireless: WPA(2)-PSK

Security Mode

Choose WPA-PSK or WPA2-PSK from the drop-down list box.

WPA Compatible

This field is only available for WPA2-PSK. Select this if you want the ZyXEL 

Device to support WPA-PSK and WPA2-PSK simultaneously.