ZyXEL Communications P-660H-D Series User Manual
P-660H-D Series Quick Start Guide
3
• Web Configurator Internet Access Wizard
Note: Zero configuration is only able to configure the device automatically for Internet access if you are
using PPPoE, PPPoA or ENET ENCAP encapsulation with a dynamically-assigned IP address
from your ISP.
from your ISP.
If you’re not using these Internet access settings, then use the Web Configurator Internet
Access Wizard to manually configure the device.
Access Wizard to manually configure the device.
You will need your Internet access information such as user name and password if given by your ISP.
2.1 Zero Configuration
Launch your web browser and navigate to any web
site (for example, www.zyxel.com). The Prestige
automatically detects and configures your Internet
connection. This may take about two minutes.
site (for example, www.zyxel.com). The Prestige
automatically detects and configures your Internet
connection. This may take about two minutes.
If you have a PPPoE or PPPoA connection, a
screen displays prompting you to enter your
Internet account information. Enter the username,
password and/or service name exactly as provided.
Click Log on to the Internet!.
screen displays prompting you to enter your
Internet account information. Enter the username,
password and/or service name exactly as provided.
Click Log on to the Internet!.
INFORMATION From ISP
ENCAPSULATION METHOD YOU ARE USING
None
RFC1483 in bridge mode with a dynamic IP address or ENET
ENCAP with a dynamic IP address
ENCAP with a dynamic IP address
An IP address only
RFC1483 in routing mode with a static IP address
A user name and password (and an IP address)
PPPoA or PPPoE encapsulation (with a static IP address)
An IP address, subnet mask and a gateway IP
address
address
ENET ENCAP with a static IP address