ZyXEL Communications P-661HW User Manual

P-661H/HW Series User’s Guide

Chapter 3 Wizards

75

The following table describes the labels in this screen.

Follow the on-screen instructions and click Finish to complete the wizard setup and save your 
configuration.

Figure 36   Bandwidth Management Wizard: Complete

Table 23   Bandwidth Management Wizard: Configuration

Active

Select an entry’s Active check box to turn on bandwidth management for the service/

application.

Service

These fields display the services names.

Priority

Select High, Mid or Low priority for each service to have your ZyXEL Device use a 

priority for traffic that matches that service. 
A service with High priority is given as much bandwidth as it needs. 
If you select services as having the same priority, then bandwidth is divided equally 

amongst those services. 
Services not specified in bandwidth management are allocated bandwidth after all 

specified services receive their bandwidth requirements.
If the rules set up in this wizard are changed in Advanced > Bandwidth MGMT > 

Rule Setup, then the service priority radio button will be set to User Configured.
The Advanced > Bandwidth MGMT > Rule Setup screen allows you to edit these 

rule configurations.

Auto classifier 

rest bandwidth

Select Auto classifier rest bandwidth to automatically allocate unbudgeted or 

unused bandwidth to services based on the packet type.

Back

Click Back to go back to the previous wizard screen.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Exit

Click Exit to close the wizard screen without saving your changes.