ZyXEL Communications P-660 User Manual
P-660 Series Support Notes
Setup your P-660 under bridge mode
The following procedure shows you how to configure your P-660 as an ADSL
Modem for bridging traffic. We will use SMT menu to guide you through the related
menu. You can use console or Telnet for finishing these configurations.
Modem for bridging traffic. We will use SMT menu to guide you through the related
menu. You can use console or Telnet for finishing these configurations.
1. Configure P-660 as bridge mode in Menu 1 General Setup.
Menu 1 – General setup
System name=P-660
Location=
Contact Person's Name=
Domain Name=
Edit Dynamic DNS= No
Route IP= No
Bridge=
Yes
2. Configure a LAN IP for the P-660 and turn off DHCP Server in Menu 3.2-TCP/IP
Ethernet Setup. We use 192.168.1.1 in this case.
Ethernet Setup. We use 192.168.1.1 in this case.
16
All contents copyright © 2005 ZyXEL Communications Corporation.