ZyXEL Communications P-660 User Manual
P-660 Series Support Notes
4. There are two interfaces to apply the policy set, they are the LAN interface (menu
3.2) and WAN interface (menu 11.3). It depends where the gateway specified in the
policy rule is located. If the gateway you specified is located on the local LAN you
apply the policy set in menu 3.2 (LAN interface). If the gateway you specified is
located on the remote WAN site you apply the policy set in menu 11.3 (WAN
interface).
3.2) and WAN interface (menu 11.3). It depends where the gateway specified in the
policy rule is located. If the gateway you specified is located on the local LAN you
apply the policy set in menu 3.2 (LAN interface). If the gateway you specified is
located on the remote WAN site you apply the policy set in menu 11.3 (WAN
interface).
Menu 3.2 - TCP/IP and DHCP Setup
DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies=
1
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Menu 11.3 - Remote Node Network Layer Options
IP Options: Bridge Options:
Rem IP Addr: Ethernet Addr Timeout(min)= N/A
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT = None
Address Mapping Set= N/A
88
All contents copyright © 2005 ZyXEL Communications Corporation.