ZyXEL Communications ZyAIR 100 User Manual
ZyAIR 100 Wireleass PC Card
Table 4-1 Utiltity – Access Point Browser Screen Menu Fields
ITEM
DESCRIPTION
SS_ID
The SS ID (Service Set ID or MAC address) of the Access Point.
BSS_ID
The BSS ID (Basic Service Set ID) of the Access Point.
Channel
The operating channel of the respective Access Point.
Capability
When communicating with any Access Point, it will display BSS. This means that the
Access Point is in the Infrastructure mode. When the device is in Ad-hoc mode, no
information appears in this column.
Access Point is in the Infrastructure mode. When the device is in Ad-hoc mode, no
information appears in this column.
Signal
The signal level is in the range of 27 to 154. A high number indicates a strong signal.
This information is for technician’s use only.
This information is for technician’s use only.
Noise
This measures the actual amount of noise within your area. There may be situations
where you are close to your Access Point but your signal is low. This may indicate a
high noise level. This information is for technician’s use only.
where you are close to your Access Point but your signal is low. This may indicate a
high noise level. This information is for technician’s use only.
Rates
The data rates that ZyAIR 100 supports.
4.2.5 Site Survey
Use Site Survey to view the channel quality of all 14 radio channels. The blue bar indicates good channel
quality. The higher the blue bar, the better the quality (for instance, less interference). The yellow indicates
fair channel quality. The red bar indicates the channel is busy or having severe interference.
quality. The higher the blue bar, the better the quality (for instance, less interference). The yellow indicates
fair channel quality. The red bar indicates the channel is busy or having severe interference.
4-10
Parameter
Configuration