ZyXEL Communications Prestige 642 User Manual

Prestige 642 PPPoE Modem

3-6

Web Configurator

This field reflects the type of modem you chose in the previous screen (READ ONLY).

This field is dependent on the Modem Type field (READ ONLY) and reflects the
protocol used by the modem selected in the previous screen.

Select either VC or LLC. Obtain this information from your ISP.

Be sure to use the correct Virtual Path Identifier (VPI) and Virtual Channel Identifier
(VCI) numbers supplied by the telephone company. The valid range for the VPI is 0 to
255 and for the VCI is 32 to 65535 (0 to 31 is reserved for local management of ATM
traffic).

VPI

Enter the VPI assigned to you by your ISP.

VCI

Enter the VCI assigned to you by your ISP.

Service Name

Type the name of your PPPoE service here. If you do not know your Service Name
then leave this field blank.

User Name

Enter the login name that your ISP gives you. For PPPoE encapsulation this field must
be of the form user@domain.xxx where the domain identifies your ISP.

Password

Enter the password associated with the User Name name above.

Idle Timeout

(sec)

100 (default)

When you have finished, click Finish to save your customized settings and exit this screen or Back to
return to the previous screen without saving.

The screen shown next appears if you selected Modem from the initial Wizard screen.