ZyXEL Communications M-302 User Manual

M-302 User’s Guide

42

Chapter 4 ZyXEL Utility Configuration

The following table describes the labels in this screen. 

Figure 26   Security Settings: 802.1x 

The following table describes the labels in this screen.  

Table 10   Security Settings: WPA-PSK

Encryption Type

The encryption mechanisms used for WPA and WPA-PSK are the same. The only 

difference between the two is that WPA-PSK uses a simple common password, 

instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to 

 for more information.

Pre-Shared Key

Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-

sensitive ASCII characters (including spaces and symbols).

Back

Click Back to go to the Site Survey screen to select and connect to other network.

Next

Click Next to confirm your selections and advance to the Confirm Save screen.  

Exit

Click Exit to return to the Site Survey screen without saving.

Table 11   Security Settings: 802.1x

Authentication 

Type

The type of authentication you use depends on the authentication server or AP. 

Select an authentication method from the drop down list. Options are TLS, TTLS 

and PEAP.

Login Name

Enter a user name. 
This is the user name that you or an administrator set up on a RADIUS server.

Password

This field is not available when you select TLS in the Authentication Type field. 
Enter the password associated with the user name above. 

Certificate

This field is only available when you select TLS in the Authentication Type field. 
Select a certificate used by the authentication server to authenticate the M-302.

Note: You must first have a wired connection to a network and 

obtain the certificate(s) from a certificate authority (CA).