ZyXEL Communications NWA3160 User Manual

Page of 314
Chapter 6 AP Controller Mode (NWA-3160 Only)
ZyXEL NWA-3160 Series User’s Guide
82
The following table describes the new labels in this screen.
6.1.1  The AP List Status Screen
Use this screen to see a list of the APs managed by the ZyXEL Device. When the ZyXEL 
Device is in AP controller mode, click AP List in the Status screen. The following screen 
displays.
Figure 48   AP List Status
Table 12   AP Controller: the Status Screen
LABEL
DESCRIPTION
Registration Type
This field displays how the managed APs are registered with the ZyXEL 
Device.
Manual displays if you add unmanaged APs to the ZyXEL Device’s list 
of managed APs manually.
Always Accept displays if the ZyXEL Device automatically manages 
any CAPWAP-enabled AP that transmits a management request over 
the network.
Management Mode
When the ZyXEL Device is in AP controller mode, this displays Controller.
On-line
This field displays the number of access points, managed by the ZyXEL 
Device, that are currently active.
Off-line
This field displays the number of access points, managed by the ZyXEL 
Device, that are not currently active (turned off or otherwise unreachable 
on the network).
Un-managed
This field displays the number of access points on the network that are not 
managed by the ZyXEL Device, but are transmitting CAPWAP 
management requests.
802.11a
This field displays the number of wireless clients associated with APs 
managed by the ZyXEL Device (including the ZyXEL Device itself) using 
IEEE 802.1a.
802.11b/g
This field displays the number of wireless clients associated with APs 
managed by the ZyXEL Device (including the ZyXEL Device itself) using 
IEEE 802.1b or IEEE 802.11g.
AP List
Click this to see a list of the APs managed by the ZyXEL Device. See 
AP Statistics
Click this to see packet statistics related to each of the APs managed by 
.
Association List
Click this to see information about each of the wireless clients connected 
to APs managed by the ZyXEL Device. See 
.
SSID Information
Click this to see details of the security settings used by each SSID (Service 
Set IDentifier), and the number of wireless clients associated with each 
.