ZyXEL Communications NWA3160 User Manual

 Chapter 7 System Screens

ZyXEL NWA-3160 Series User’s Guide

Figure 59   SYSTEM > Password.

The following table describes the labels in this screen.

Table 24   Password

Enable Admin at Local Select this check box to have the device authenticate management logins to 

the device.

Use old setting

Select this to have the ZyXEL Device use the local management password 

already configured on the device (“1234” is the default).

Use new setting

Select this if you want to change the local management password.

Old Password

Type in your existing system password (“1234” is the default password).

New Password

Type your new system password (up to 31 characters). Note that as you type 

a password, the screen displays an asterisk (*) for each character you type.

Retype to Confirm

Retype your new system password for confirmation.

Enable Admin on 

RADIUS

Select this (and configure the other fields in this section) to have a RADIUS 

server authenticate management logins to the ZyXEL Device. 

Use old setting

Select this to have a RADIUS server authenticate management logins to the 

ZyXEL Device using the RADIUS username and password already configured 

on the device.

Use new setting

Select this if you want to change the RADIUS username and password the 

ZyXEL Device uses to authenticate management logon.

User Name

Enter the username for this user account. This name can be up to 31 ASCII 

characters long, including spaces.

Password

Type a password (up to 31 ASCII characters) for this user profile. Note that as 

you type a password, the screen displays a (*) for each character you type. 

Spaces are allowed.