ZyXEL Communications G-5100 User Manual
ZyAIR G-5100
3
1 Use the installation tool to
connect the ground cable
to the ZyAIR’s frame
ground. Connect the other
end of the ground cable to
an appropriate grounding
system.
to the ZyAIR’s frame
ground. Connect the other
end of the ground cable to
an appropriate grounding
system.
2 For initial configuration,
use a cross-over Ethernet
cable to connect the
power injector’s DATA IN
port to a computer.
cable to connect the
power injector’s DATA IN
port to a computer.
3 Connect the RJ-45
Ethernet connector end of
the outdoor Ethernet cable
to the power injector’s
POWER & DATA OUT
port.
Connect the other end to
the outdoor Ethernet port
on the bottom of the ZyAIR
(align the connector’s
notch with the port’s inside
bump).
the outdoor Ethernet cable
to the power injector’s
POWER & DATA OUT
port.
Connect the other end to
the outdoor Ethernet port
on the bottom of the ZyAIR
(align the connector’s
notch with the port’s inside
bump).
4 Use a power cord to
connect the power
injector’s power socket to
an AC power source.
injector’s power socket to
an AC power source.
5 Look at the front of the
power injector. The
POWER LED turns on
first. Then the ACTIVE
LED turns on and the
ZyAIR starts.
POWER LED turns on
first. Then the ACTIVE
LED turns on and the
ZyAIR starts.