Manualsbrain.com
  1. Manuals
  2. Brands
  3. ZyXEL Communications
  4. VSG-1000
  5. User Manual

ZyXEL Communications VSG-1000 User Manual

Download
Page of 131
VSG-1000 Vantage Service Gateway 
IP and MAC Address Pass Through 
10-1 
This chapter shows you how to configure IP and MAC address pass through.  
10.1 Configuring IP and MAC Address Pass Through 
You can set the VSG to allow the forwarding of packets from a specified LAN device, such as a file server or 
computer, without prompting for a user name and password. You can specify up to 40 IP addresses and 10 MAC 
addresses of LAN devices allowed to pass through the VSG. For example, in an airport VIP room, you can specify 
the IP or MAC addresses of computers that subscribers can use without logging in.  
From the Main Menu screen, click Configure, Pass Through IP & MAC. A screen displays as shown. 
 
Figure 10-1 IP & MAC Address Pass Through  
The following table describes the labels in this screen.  
Table 10-1 IP & MAC Address Pass Through 
LABEL DESCRIPTION 
No. 
This read-only field displays the index number of the entry. 
IP Address 
Enter the IP address of the device (in dotted decimal notation) whose packets are allowed to pass through the 
VSG. For example, 10.59.1.10. 
MAC Address 
Enter the MAC address of the device (in 6 hexadecimal pairs, for example, 00-50-BA-8D-22-96) whose packets 
are allowed to pass through the VSG.  
Apply 
Click Apply to save the changes back to VSG and go back to the Utility Menu.  
Clear 
Click Clear to start configuring this screen again.  
Home 
Click Home to go back to the Main Menu screen. The changes you made will not be saved if you have not 
clicked Apply. 
Chapter 10   
IP and MAC Address Pass Through