ZyXEL Communications P-870HW-I User Manual

P-870HW-I1 User’s Guide

Chapter 6 Wireless LAN

103

Use this screen to enable and configure IEEE 802.1x authentication and static WEP encryption 
in your wireless network. To open this screen, click Network > Wireless LAN, and set 
Security Mode to 802.1x + Static WEP.

Figure 51   Network > Wireless LAN > General > 802.1x + Static WEP

IP Address

Enter the IP address of the external accounting server in dotted decimal notation.

Port Number

Enter the port number of the external accounting server. You need not change this 

value unless your network administrator instructs you to do so.

Shared Secret

Enter a password (up to 31 alphanumeric characters) as the key to be shared 

between the external accounting server and the ZyXEL Device. The key must be the 

same on the external accounting server. The key is not sent over the network. 

Table 39   Network > Wireless LAN > General > 802.1x + Dynamic WEP (continued)