ZyXEL Communications P-870HW-I User Manual

P-870HW-I1 User’s Guide

Chapter 8 LAN

131

Use this screen to edit advanced settings, such as RIP and multicast, on the LAN port. To open 
this screen, click Network > LAN > Advanced.

Figure 70   Network > LAN > Advanced

RIP Direction

Use this field to control how much routing information the ZyXEL Device sends 

and receives on the subnet.
None - The ZyXEL Device does not send or receive routing information on the 

subnet.
Both - The ZyXEL Device sends and receives routing information on the subnet.
In Only - The ZyXEL Device only receives routing information on the subnet.
Out Only - The ZyXEL Device only sends routing information on the subnet.

RIP Version

Select which version of RIP the ZyXEL Device uses when it sends or receives 

information on the subnet.
RIP-1 - The ZyXEL Device uses RIPv1 to exchange routing information.
RIP-2B - The ZyXEL Device broadcasts RIPv2 to exchange routing information.
RIP-2M - The ZyXEL Device multicasts RIPv2 to exchange routing information.

Apply

Click this to save your changes back to the ZyXEL Device.

Reset

Click this to reload the previous configuration for this screen.

Table 52   Network > LAN > IP Alias (continued)