ZyXEL Communications P-870HW-I User Manual
P-870HW-I1 User’s Guide
318
Chapter 34 System Maintenance 24.1 - 24.4
Figure 204 Menu 24.4: System Maintenance - Diagnostic
The following table describes the labels in this menu.
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. PPPoE Setup Test
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. PPPoE Setup Test
System
11. Reboot System
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A
Table 150 Menu 24.4: System Maintenance - Diagnostics
FIELD
DESCRIPTION
Ping Host
Select this if you want to ping a specific computer. Enter 1 in the Enter Menu
Selection Number field, and then enter the IP address in the Host IP Address
field.
WAN DHCP Release
Select this if you want to release the IP address, subnet mask, and other
network information provided by the DHCP server.
WAN DHCP Renewal Select this if you want to get a new IP address, subnet mask, and other network
information from the DHCP server.
PPPoE Setup Test
Select this if you want to test the current PPPoE settings. You cannot run this
test if you selected Ethernet in the Encapsulation field.
Reboot System
Use this screen to reboot the ZyXEL Device without turning the power off. This
does not affect the ZyXEL Device's configuration.
Enter Menu Selection
Number
Enter the test you want to perform.
Host IP Address
If you select Ping Host, enter the IP address of the computer you want the
ZyXEL Device to ping.