ZyXEL Communications P-870HW-I User Manual
P-870HW-I1 User’s Guide
Chapter 36 System Maintenance 24.8 - 24.11
333
C
H A P T E R
36
System Maintenance 24.8 - 24.11
This chapter covers menus 24.8 through 24.11. Use these menus to get a use CI commands,
see how long you have accessed the Internet and how much budgeted time remains, set the
current date and time, and configure remote access to the ZyXEL Device.
see how long you have accessed the Internet and how much budgeted time remains, set the
current date and time, and configure remote access to the ZyXEL Device.
36.1 Command Interpreter Mode
Use this menu to use CI commands. To do so, enter 8 in menu 24.
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of
the same functionality as the SMT, while adding some low-level setup and diagnostic
functions. A list of valid commands can be found by entering
the same functionality as the SMT, while adding some low-level setup and diagnostic
functions. A list of valid commands can be found by entering
help
or
?
.
Figure 220 Valid CI Commands
Type
exit
to return to the SMT main menu.
36.2 Budget Management
This menu is only applicable your Internet connection uses PPPoE encapsulation. Use this
menu to look at how long you have accessed the Internet and how much budgeted time
remains. See
menu to look at how long you have accessed the Internet and how much budgeted time
remains. See
for related settings. To open this menu, enter 1 in menu
24.9.
P870HW-I1> ?
Valid commands are:
sys exit device ether
poe config vdsl wlan
ip ppp bridge bm
certificates 8021x autoSec radius
Valid commands are:
sys exit device ether
poe config vdsl wlan
ip ppp bridge bm
certificates 8021x autoSec radius