ZyXEL Communications P-870HW-I User Manual

P-870HW-I1 User’s Guide

338

Chapter 36 System Maintenance 24.8 - 24.11

Figure 224   Menu 24.11: Remote Management Control

The following table describes the labels in this menu.

                     Menu 24.11 - Remote Management Control

     TELNET Server:     Port = 23         Access = ALL
                        Secure Client IP = 0.0.0.0
     FTP Server:        Port = 21         Access = ALL
                        Secure Client IP = 0.0.0.0
     SSH Server:        Certificate = newDefault
                        Port = 22         Access = ALL
                        Secure Client IP = 0.0.0.0
     HTTPS Server:      Certificate = newDefault
                        Authenticate Client Certificates = No
                        Port = 443        Access = ALL
                        Secure Client IP = 0.0.0.0
     HTTP Server:       Port = 80         Access = ALL
                        Secure Client IP = 0.0.0.0
     SNMP Service:      Port = 161        Access = ALL
                        Secure Client IP = 0.0.0.0
     DNS Service:       Port = 53         Access = ALL
                        Secure Client IP = 0.0.0.0

Table 157   Menu 24.11: Remote Management Control

These fields are similar for all servers and services.

Port

Enter the port number this service can use to access the ZyXEL Device. The 

computer must use the same port number.

Access

Select the interface(s) through which a computer may access the ZyXEL 

Device using this service.

Secure Client IP

Enter an IP address to only allow the computer with this IP address to access 

the ZyXEL Device using this service. Enter 0.0.0.0 to allow any computer to 

access the ZyXEL Device using this service.

These fields are used by specific servers and services.

SSH Server

Certificate

Select the certificate the ZyXEL Device provides to clients using this service.

HTTPS Server

Certificate

Select the certificate the ZyXEL Device provides to clients using this service.

Authenticate Client 

Certificates

This field is disabled if you have not set up any trusted certification authorities. 

Select this if you want the trusted certification authorities to check the clients’ 

certificates before the ZyXEL Device allows access using this service.