ZyXEL Communications P-870HW-51a v2 User Manual
Chapter 3 Introducing the Web Configurator
P-870HW-51a v2 User’s Guide
37
• B - navigation panel
• C - main window
• D - status bar
• C - main window
• D - status bar
3.2.1 Navigation Panel
Use the menu items on the navigation panel to open screens to configure ZyXEL
Device features. The following tables describe each menu item.
Device features. The following tables describe each menu item.
Table 2 Navigation Panel Summary
LINK
TAB
FUNCTION
Status
This screen shows the ZyXEL Device’s general device and network
status information. Use this screen to access the statistics and
client list.
status information. Use this screen to access the statistics and
client list.
Network
WAN
Internet
Connection
Connection
Use this screen to configure ISP parameters, WAN IP address
assignment, DNS servers and other advanced properties.
assignment, DNS servers and other advanced properties.
More
Connections
Connections
Use this screen to configure additional WAN connections.
LAN
IP
Use this screen to configure LAN TCP/IP DHCP settings.
Client List
Use this screen to view current DHCP client information and to
always assign specific IP addresses to individual MAC addresses
(and host names).
always assign specific IP addresses to individual MAC addresses
(and host names).
IP Alias
Use this screen to partition your LAN interface into subnets.
Wireless LAN
General
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
authentication/security settings.
WPS
Use this screen to enable WPS (Wi-Fi Protected Setup) and view
the WPS status.
the WPS status.
WPS Station
Use this screen to use WPS to set up your wireless network.
MAC Filter
Use this screen to configure the ZyXEL Device to give exclusive
access to specific wireless clients or exclude specific wireless
clients from accessing the ZyXEL Device.
access to specific wireless clients or exclude specific wireless
clients from accessing the ZyXEL Device.
Advanced
Setup
Setup
Use this screen to configure the advanced wireless LAN settings.
NAT
Port
Forwarding
Forwarding
Use this screen to make your local
servers visible to the outside
world.
DMZ Host
Use this screen to configure a default server which receives
packets from ports that are not specified in the Port Forwarding
screen.
packets from ports that are not specified in the Port Forwarding
screen.
Security
IP Filter
Incoming
This screen shows a summary of the IP filtering rules, and allows
you to add or remove an incoming IP filtering rule that allows
incoming traffic from the WAN.
you to add or remove an incoming IP filtering rule that allows
incoming traffic from the WAN.
Advanced
Static Route
IP Static Route Use this screen to configure IP static routes to tell your device
about networks beyond the directly connected remote nodes.