ZyXEL Communications P-870HW-51a v2 User Manual

 Chapter 6 LAN Setup

P-870HW-51a v2 User’s Guide

Click Network > LAN > Client List to open the following screen. Use this screen 
to change your ZyXEL Device’s static DHCP settings.

Figure 35   LAN > Client List 

The following table describes the labels in this screen.

IP alias allows you to partition a physical network into different logical networks 
over the same Ethernet interface. The ZyXEL Device supports three logical LAN 
interfaces via its single physical Ethernet interface with the ZyXEL Device itself as 
the gateway for each LAN network.

When you use IP alias, you can also configure firewall rules to control access 
between the LAN's logical networks (subnets).

Table 15   LAN > Client List

IP Address

Enter the IP address that you want to assign to the computer on your 
LAN with the MAC address that you will also specify.

MAC Address

Enter the MAC address of a computer on your LAN.

Add Entries

Click this to add a static DHCP entry before the dynamic DHCP 
entry(ies). 

#

This is the index number of the static IP table entry (row).

IP Address

This field displays the IP address relative to the # field listed above.

MAC Address

The MAC (Media Access Control) or Ethernet address on a LAN (Local 
Area Network) is unique to your computer (six pairs of hexadecimal 
notation).

A network interface card such as an Ethernet adapter has a hardwired 
address that is assigned at the factory. This address follows an industry 
standard that ensures no other adapter has a similar address.

Remove

Click this to delete a static DHCP entry. You cannot delete a dynamic 
DHCP entry. A window displays asking you to confirm that you want to 
delete the selected entry.