ZyXEL Communications P-870HW-51a v2 User Manual

 Chapter 7 Wireless LAN

P-870HW-51a v2 User’s Guide

To configure advanced wireless settings, click Network > Wireless LAN > 
Advanced Setup. The screen appears as shown.

Figure 47   Wireless LAN > Advanced Setup

The following table describes the labels in this screen. 

Table 25   Wireless LAN > Advanced Setup

RTS/CTS 
Threshold

Enter a value between 0 and 2432. 

Fragmentatio
n Threshold

This is the maximum data fragment size that can be sent. Enter a value 
between 256 and 2432. 

Number of 
Wireless 
Stations 
Allowed

Specify the maximum number (from 1 to 64) of the wireless stations that 
may connect to the ZyXEL Device.

Output Power Set the output power of the ZyXEL Device. If there is a high density of APs 

in an area, decrease the output power to reduce interference with other 
APs. Select one of the following 20%, 40%, 60%, 80% or 100%. 

Multicast 
Rate

Select a data rate at which the ZyXEL Device transmits wireless multicast 
traffic.

If you select a high rate, multicast traffic may occupy all the bandwidth 
and cause metwork congestion.