ZyXEL Communications WAP3205 User Manual
Chapter 5 Easy Mode
WAP3205 User’s Guide
40
The following table describes the general wireless LAN labels in this screen.
Table 12 Wireless Security
LABEL
DESCRIPTION
Wireless
Network
Name (SSID)
Network
Name (SSID)
(Service Set IDentity) The SSID identifies the Service Set with which a
wireless station is associated. Wireless stations associating to the access
point (AP) must have the same SSID. Enter a descriptive name (up to 32
keyboard characters) for the wireless LAN.
wireless station is associated. Wireless stations associating to the access
point (AP) must have the same SSID. Enter a descriptive name (up to 32
keyboard characters) for the wireless LAN.
The default SSID is WAP3205.
Security
mode
mode
Select WPA-PSK or WPA2-PSK to add security on this wireless network.
The wireless clients which want to associate to this network must have
same wireless security settings as this device. After you select to use a
security, additional options appears in this screen.
The wireless clients which want to associate to this network must have
same wireless security settings as this device. After you select to use a
security, additional options appears in this screen.
Select No Security to allow any client to connect to this network without
authentication.
authentication.
Wireless
password
password
This field appears when you choose wither WPA-PSK or WPA2-PSK as
the security mode.
the security mode.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Verify
password
password
Type the password again to confirm.
Apply
Click Apply to save your changes back to the WAP3205.
Cancel
Click Cancel to close this screen.
WPS
Click this to configure the WPS screen.
You can transfer the wireless settings configured here (Wireless Security
screen) to another wireless device that supports WPS.
screen) to another wireless device that supports WPS.