ZyXEL Communications WAP3205 User Manual

Chapter 8 Universal Repeater Mode

WAP3205 User’s Guide

The following table describes the labels shown in the Status screen.

Table 26   Status Screen: Universal Repeater Mode 

Logout

Click this at any time to exit the Web Configurator.

Device Information
Host Name

This is the System Name you enter in the Maintenance > General 
screen. It is for identification purposes.

Firmware Version

This is the firmware version and the date created. 

Sys OP Mode

This is the device mode (

) to which the WAP3205 

is set - Universal Repeater Mode.

LAN Information

MAC Address

This shows the LAN Ethernet adapter MAC Address of your device.

IP Address

This shows the LAN port’s IP address.

IP Subnet Mask

This shows the LAN port’s subnet mask.

DHCP

This shows the LAN port’s DHCP role - Client or None.

WLAN Information

WLAN OP Mode

This is the device mode (

WAP3205’s wireless LAN is set - Universal Repeater Mode.

MAC Address

This shows the wireless adapter MAC Address of your device.

Status

This shows the current status of the Wireless LAN - ON.

Name (SSID)

This shows a descriptive name used to identify the WAP3205 in the 
wireless LAN. 

Channel

This shows the channel number which you select manually or the 
WAP3205 automatically scans and selects.

Operating Channel

This shows the channel number which the WAP3205 is currently using 
over the wireless LAN. 

Security Mode

This shows the level of wireless security the WAP3205 is using.

802.11 Mode

This shows the wireless standard.

WLAN Station Status

This shows whether a wireless station is currently associated with the 
WAP3205.

WPS

This displays Configured when the WPS has been set up. 

This displays Unconfigured if the WPS has not been set up.

Click the status to display Network > Wireless LAN > WPS screen.

Interface Status

Interface

This displays the WAP3205 port types. The port types are: LAN and 
WLAN.

Status

For the LAN and WAN ports, this field displays Down (line is down) or Up 
(line is up or connected).

For the WLAN, it displays Up when the WLAN is enabled or Down when 
the WLAN is disabled.