ZyXEL Communications G-302 User Manual

ZyXEL G-302 v3 User’s Guide

Chapter 3 ZyXEL Utility Configuration

37

Note: You can use WPA and WPA2 with the G-302 v3 only in Microsoft Windows XP 

or Windows 2000.

Figure 17   Security Settings: WPA-PSK/WPA2-PSK

The following table describes the labels in this screen. 

PEAP Inner EAP

This field is only available when you select PEAP in the Authentication Type 

field.
Select a PEAP protocol. Options are TLS and MS CHAP-V2.

TTLS Inner 

authentication

This field is only available when you select TTLS in the Authentication Type field.
Select a TTLS protocol that the RADIUS server uses. Options are CHAP, MS 

CHAP, MS CHAP-V2 and PAP.

Back

Click Back to go to the

 

Site Survey screen to select and connect to other network.

Next

Click Next to confirm your selections and advance to the Confirm Save screen. 

Refer to 

.  

Exit

Click Exit to return to the Site Survey

 

screen without saving.

Table 7   Security Settings: WPA/WPA2

Table 8   Security Settings: WPA-PSK/WPA2-PSK

Encryption Type

The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are 

the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses 

a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to 

 for more information.

Pre-Shared Key

Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-

sensitive ASCII characters (including spaces and symbols).

Back

Click Back to go to the Site Survey screen to select and connect to other network.

Next

Click Next to confirm your selections and advance to the Confirm Save screen. 

Refer to 

. 

Exit

Click Exit to return to the Site Survey screen without saving.