ZyXEL Communications G-260 User Manual

ZyXEL G-260 User’s Guide

37

Chapter 3 ZyXEL Utility Configuration

Follow the steps below to connect to a WLAN network using the Site Survey screen.

1 Click Scan to search for all available wireless networks within range.

2 To join a network, click an entry in the table to select a wireless network and then click 

Connect.

3 If the WEP encryption is activated for the selected wireless network, the Security 

Settings screen displays. You must set the related fields in the Security Settings screen 
to the same security settings as the associated wireless device. Refer to 

for more information.

Otherwise click the Back or Exit button and connect to another wireless network without 
data encryption.

4 Verify that you have successfully connected to the selected network and check the 

network information in the Link Info screen.

When you configure the ZyXEL G-260 to connect to a network with wireless security 
activated and the security settings are disabled on the ZyXEL G-260, the screen varies 
according to the encryption method used by the selected network.

Figure 13   Security Settings: WEP  

MAC address 

This field displays the MAC address of the wireless device.

Surveyed at 

This field displays the time when the wireless device is scanned.

Table 5   Site Survey  (continued)