ZyXEL Communications G-260 User Manual

ZyXEL G-260 User’s Guide

41

Chapter 3 ZyXEL Utility Configuration

The following table describes the labels in this screen.  

Use the Confirm Save screen to confirm and save the security settings.

Figure 17   Confirm Save Screen 

Table 9   Security Settings: 802.1x

Authentication 

Type

Select an authentication method from the drop down list. Options are TLS and 

PEAP.

Login Name

Enter a user name. 
This is the user name that you or an administrator set up on a RADIUS server.

Password

This field is not available when you select TLS in the Authentication Type field. 
Enter the password associated with the user name above. 

Certificate

This field is only available when you select TLS in the Authentication Type field. 
Specify the location and name of a certificate in the Certificate field or click 

Browse to locate it.

Note: You must first have a wired connection to a network and 

obtain the certificate(s) from a certificate authority (CA). 
Consult your network administrator for more information.

Browse

This field is only available when you select TLS in the Authentication Type field.
Click this button to display the Select Certificate screen, select a certificate and 

click OK.

Validate Server 

Certificate

Select the check box to check the certificate of the authentication server.

PEAP Inner EAP

This field is only available when you select PEAP in the Authentication Type 

field.
Use the drop-down list box to select a PEAP protocol. Options are MD5 

CHALLENGE, TOKEN CARD and MS CHAP v2.

Save

Click Save to save the changes back to the ZyXEL G-260 and display the Link 

Info screen. Otherwise, click the close (

) button to discard changes and go 

back to the Site Survey screen.