ZyXEL Communications G-220F User Manual

ZyXEL G-220F User’s Guide

Chapter 3 Wireless Station Mode Configuration

46

The following table describes the labels in this screen. 

3 If you select Infrastructure network type in the first screen, select WEP, WPA-PSK, 

WPA-RADIUS or RADIUS from the drop-down list box to enable data encryption. If 
you select Ad-Hoc network type in the first screen, you can only use WEP encryption 
method.

 

Otherwise, select Disabled to allow the ZyXEL G-220F to communicate with 

the access points or other peer wireless computers without any data encryption and skip 
to step

Figure 24   Station Mode: Profile: Wireless Settings 

4 The screen varies depending on the encryption method you select in the previous screen. 

The settings must be exactly the same on the APs or other peer wireless computers as 
they are on the ZyXEL G-220F. Refer to 

 for detailed 

information on wireless security configuration.

Table 13   Station Mode: Profile: Select a Channel 

Wireless Settings

Channel

Select a channel number from the drop-down list box. To associate to an ad-hoc 

network, you must use the same channel as the peer computer.

Wireless Mode

Select Mixed Mode to have the ZyXEL G-220F connect to either an IEEE 802.11g 

or IEEE 802.11b wireless device.
Select G-Only to have the ZyXEL G-220F connect to an IEEE 802.11g wireless 

device only and vice versa.
Select B-Only to have the ZyXEL G-220F connect to an IEEE 802.11b wireless 

device only and vice versa.