ZyXEL Communications ZYWALL10 User Manual
ZyWALL 10 Internet Security Gateway
2-12
Hardware Installation & Initial Setup
Table 2-5 Configure Dynamic DNS Menu Fields
FIELD
DESCRIPTION
EXAMPLE
Service
Provider
Provider
Enter the name of your Dynamic DNS client.
www.dyndns.org
Active
Press [SPACE BAR] to cycle between Yes or No.
Yes
Host
Enter the domain name assigned to your ZyWALL by your
Dynamic DNS provider.
Dynamic DNS provider.
me.dyndns.org
EMAIL
Enter your e-mail address.
mail@mailserver
User
Enter your user name.
Password
Enter the password assigned to you.
Enable
Wildcard
Wildcard
Your ZyWALL supports DYNDNS Wildcard. Press [SPACE
BAR] to cycle between Yes or No This field is N/A when you
choose DDNS client as your service provider.
BAR] to cycle between Yes or No This field is N/A when you
choose DDNS client as your service provider.
Yes
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…”
to save your configuration, or press [ESC] at any time to cancel.
to save your configuration, or press [ESC] at any time to cancel.
The IP address will be updated when you reconfigure Menu 1 or perform DHCP client renewal.
If you have a private WAN IP address, then you cannot use Dynamic DNS.
2.8 WAN
Setup
This section describes how to configure the WAN using Menu 2 — WAN Setup. From the main menu,
enter 2 to open menu 2.
enter 2 to open menu 2.
ZyXEL recommends you configure this menu even if your ISP does not require MAC
address authentication.