ZyXEL Communications 2602H Series User Manual

Prestige 2602H/HW Series User’s Guide

Chapter 9 Voice Screens

155

Click Voice in the navigation panel and then Call Forward to display the following screen.
Use this screen to configure the Prestige to block or redirect calls. You can configure a 
different call forwarding table for each SIP account or use the same call forwarding table for 
both. See 

 to set which call forwarding table each SIP account uses.

Incoming Lifeline 

Call mapping to
(Lifeline models 

only)

Phone 1 and Phone 2 correspond to the Prestige’s physical PHONE 1 and 2 

ports, respectively. Select whether you want to receive regular (PSTN) phone 

calls on Phone 1, Phone 2 or both. If you select both, all of the phones 

connected to the Prestige’s PHONE ports will ring when a call comes in on the 

PSTN line.

Call Service Mode

Use this field to set how the Prestige handles supplementary phone services 

(call hold, call waiting, call transfer and three-way conference calls). Select the 

mode that your voice service provider supports.
Select Europe Type to use the supplementary phone services in European 

mode.
Select USA Type to use the supplementary phone services American mode.

Note: To take full advantage of the supplementary phone 
services available though the Prestige's phone ports, you may 
need to subscribe to the services from your voice service 
provider.

Back

Click Back to return to the previous screen. 

Apply

Click Apply to save your changes back to the Prestige.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 45   Voice Common (continued)