ZyXEL Communications 2602H Series User Manual

Prestige 2602H/HW Series User’s Guide

Chapter 4 LAN Setup

89

This table allows you to assign IP addresses on the LAN to specific individual computers 
based on their MAC Addresses. 

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address 
is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 
00:A0:C5:00:00:02.

To change your Prestige’s static DHCP settings, click LAN, then the Static DHCP tab. The 
screen appears as shown.

Figure 27   LAN: Static DHCP

The following table describes the labels in this screen. 

Table 18   LAN: Static DHCP

#

This is the index number of the Static IP table entry (row).

MAC Address

Type the MAC address (with colons) of a computer on your LAN.

IP Address

This field specifies the size, or count of the IP address pool.

Back

Click Back to return to the previous screen. 

Apply

Click Apply to save your changes back to the Prestige.

Cancel

Click Cancel to begin configuring this screen afresh.