ZyXEL Communications unified security gateway User Manual
Chapter 7 Tutorials
ZyWALL USG 20/20W User’s Guide
147
the WLAN interfaces before or after you install the wireless LAN card. This
example shows how to create a WLAN interface that uses WPA or WPA2 security
and the ZyWALL’s local user database for authentication.
example shows how to create a WLAN interface that uses WPA or WPA2 security
and the ZyWALL’s local user database for authentication.
7.13.1 Set Up User Accounts
The ZyWALL supports TTLS using PAP so you can use the ZyWALL’s local user
database with WPA or WPA2 instead of needing an external RADIUS server. For
each WLAN user, set up a user account containing the user name and password
the WLAN user needs to enter to connect to the wireless LAN.
database with WPA or WPA2 instead of needing an external RADIUS server. For
each WLAN user, set up a user account containing the user name and password
the WLAN user needs to enter to connect to the wireless LAN.
1
Click Configuration > Object > User/Group > User and the Add icon.
2
Set the User Name to wlan_user. Enter (and re-enter) the user’s password.
Click OK.
Click OK.
Figure 105 Configuration > Object > User/Group > User > Add
3
Use the Add icon in the Configuration > Object > User/Group > User screen
to set up the remaining user accounts in similar fashion.
to set up the remaining user accounts in similar fashion.
7.13.2 Create the WLAN Interface
1
Click Configuration > Network > Interface > WLAN > Add to open the
WLAN Add
WLAN Add
screen.