ZyXEL Communications 10 User Manual
ZyWALL 10
8
Step 2. The second wizard screen has three variations depending on what encapsulation type you use. Use
the information in Internet Account Information to fill in fields.
Choose Ethernet when the WAN port
is used as a regular Ethernet. Choose
from Standard or a RoadRunner
version. You’ll need User Name,
Password and Login Server IP
Address for some Roadrunner
versions.
Point-to-Point Protocol over Ethernet
(PPPoE) also functions as a dial-up
connection. Therefore you’ll also need
a username and password and
possibly the PPPoE service name.
Your ISP will give you all needed
information.
Choose PPTP if your service provider
uses a DSL terminator with PPTP
login. The ZyWALL must have a static
IP address in this case. You’ll also
need a login name, associated
password, the DSL terminator IP
address and possibly a connection ID.
Click Next to continue.
is used as a regular Ethernet. Choose
from Standard or a RoadRunner
version. You’ll need User Name,
Password and Login Server IP
Address for some Roadrunner
versions.
Point-to-Point Protocol over Ethernet
(PPPoE) also functions as a dial-up
connection. Therefore you’ll also need
a username and password and
possibly the PPPoE service name.
Your ISP will give you all needed
information.
Choose PPTP if your service provider
uses a DSL terminator with PPTP
login. The ZyWALL must have a static
IP address in this case. You’ll also
need a login name, associated
password, the DSL terminator IP
address and possibly a connection ID.
Click Next to continue.
Step 3. Fill in the fields and click Finish to save and complete the wizard setup.
WAN IP Address Assignment
Select Get automatically from ISP if
your ISP did not assign you a fixed IP
address. Select Use fixed IP address
if the ISP assigned a fixed IP address
and then enter your IP address and
subnet mask in the next two fields.
Enter the gateway IP address in this
field (if provided) when you select Use
Fixed IP Address.
Select Get automatically from ISP if
your ISP did not assign you a fixed IP
address. Select Use fixed IP address
if the ISP assigned a fixed IP address
and then enter your IP address and
subnet mask in the next two fields.
Enter the gateway IP address in this
field (if provided) when you select Use
Fixed IP Address.
DNS Server Assignment
Select Get automatically from ISP if
your ISP does not give you DNS
server addresses.
If you selected the Use fixed IP
address – Primary/Secondary DNS
Server option, enter the provided
DNS addresses in these fields.
Select Get automatically from ISP if
your ISP does not give you DNS
server addresses.
If you selected the Use fixed IP
address – Primary/Secondary DNS
Server option, enter the provided
DNS addresses in these fields.
WAN MAC Address
Select Factory Default to use the factory assigned default MAC address. Alternatively, select Spoof this Computer's MAC
address - IP Address and enter the IP address of the computer on the LAN whose MAC address you are cloning.
Select Factory Default to use the factory assigned default MAC address. Alternatively, select Spoof this Computer's MAC
address - IP Address and enter the IP address of the computer on the LAN whose MAC address you are cloning.