ZyXEL Communications ZyWALL 2 Series User Manual
ZyWALL 2 Series User’s Guide
6-20
WAN Screens
Table 6-9 Dial Backup Setup
LABEL DESCRIPTION
Get IP Address
Automatically from
Remote Server
Type the login name assigned by your ISP for this remote node.
Used Fixed IP
Address
Select this check box if your ISP assigned you a fixed IP address, then enter the
IP address in the following field.
IP address in the following field.
My WAN IP Address Leave the field set to 0.0.0.0 (default) to have the ISP or other remote router
dynamically (automatically) assign your WAN IP address if you do not know it.
Type your WAN IP address here if you know it (static). This is the address
assigned to your local ZyWALL, not the remote router.
Type your WAN IP address here if you know it (static). This is the address
assigned to your local ZyWALL, not the remote router.
Remote Node IP
Address
Leave this field set to 0.0.0.0 (default) to have the ISP or other remote router
dynamically (automatically) send its IP address if you do not know it. Type the
remote gateway's IP address here if you know it (static).
dynamically (automatically) send its IP address if you do not know it. Type the
remote gateway's IP address here if you know it (static).
Remote IP Subnet
Mask
Leave this field set to 0.0.0.0 (default) to have the ISP or other remote router
dynamically send its subnet mask if you do not know it. Type the remote
gateway's subnet mask here if you know it (static).
dynamically send its subnet mask if you do not know it. Type the remote
gateway's subnet mask here if you know it (static).
Enable SUA Network Address Translation (NAT) allows the translation of an Internet protocol
address used within one network to a different IP address known within another
network.
SUA (Single User Account) is a subset of NAT that supports two types of
mapping: Many-to-One and Server. When you select this option the ZyWALL will
use Address Mapping Set 255 in the SMT (see the section on menu 15.1 for
more information).
Select the check box to enable SUA. Clear the check box to disable SUA so the
ZyWALL does not perform any NAT mapping for the dial backup connection.
network.
SUA (Single User Account) is a subset of NAT that supports two types of
mapping: Many-to-One and Server. When you select this option the ZyWALL will
use Address Mapping Set 255 in the SMT (see the section on menu 15.1 for
more information).
Select the check box to enable SUA. Clear the check box to disable SUA so the
ZyWALL does not perform any NAT mapping for the dial backup connection.
Enable RIP Select this check box to turn on RIP (Routing Information Protocol), which allows
a router to exchange routing information with other routers.