ZyXEL Communications ZyWALL 2 Series User Manual

ZyWALL 2 Series User’s Guide 

17-26 

Remote Management Screens 

SNMP Configuration 

Get Community 

Enter the Get Community, which is the password for the incoming Get and GetNext 
requests from the management station. The default is public and allows all requests. 

Set Community 

Enter the Set community, which is the password for incoming Set requests from the 
management station. The default is public and allows all requests. 

Trusted Host 

If you enter a trusted host, your ZyWALL will only respond to SNMP messages from 
this address. 0.0.0.0 (default) means your ZyWALL will respond to all SNMP 
messages it receives, regardless of source. 

Trap  

Community 

Type the trap community, which is the password sent with each trap to the SNMP 
manager. The default is public and allows all requests. 

Destination 

Type the IP address of the station to send your SNMP traps to. 

SNMP 

Service Port 

You may change the server port number for a service if needed, however you must 
use the same port number in order to use that service for remote management. 

Service Access 

Select the interface(s) through which a computer may access the ZyWALL using this 
service. 

Secure Client IP 
Address 

A secure client is a “trusted” computer that is allowed to communicate with the 
ZyWALL using this service.  

Select All to allow any computer to access the ZyWALL using this service. 

Choose Selected to just allow the computer with the IP address that you specify to 
access the ZyWALL using this service. 

Apply

 

Click Apply to save your customized settings and exit this screen. 

 

Reset

 

Click Reset to begin configuring this screen afresh.

 

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice versa. 
Refer to the Internet Access chapter for more information.