Manualsbrain.com
  1. Manuals
  2. Brands
  3. ZyXEL Communications
  4. ZyWALL 2 Series
  5. User Manual

ZyXEL Communications ZyWALL 2 Series User Manual

Download
Page of 614
ZyWALL 2 Series User’s Guide 
24-6 
LAN Setup 
Table 24-3 Menu 3.2.1: IP Alias Setup 
FIELD  
DESCRIPTION  
DEFAULT 
IP Address 
Enter the IP address of your ZyWALL in dotted decimal notation. 
192.168.2.1 
IP Subnet Mask 
Your ZyWALL will automatically calculate the subnet mask based 
on the IP address that you assign. Unless you are implementing 
subnetting, use the subnet mask computed by the ZyWALL. 
255.255.255.0 
RIP Direction 
Press [SPACE BAR] and then [ENTER] to select the RIP 
direction. Options are 
Both, In Only, Out Only or None. 
None 
Version 
Press [SPACE BAR] and then [ENTER] to select the RIP version. 
Options are 
RIP-1, RIP-2B or RIP-2M. 
RIP-1 
Incoming 
Protocol Filters 
Enter the filter set(s) you wish to apply to the incoming traffic 
between this node and the ZyWALL. 
1 
Outgoing 
Protocol Filters 
Enter the filter set(s) you wish to apply to the outgoing traffic 
between this node and the ZyWALL. 
2 
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to save 
your configuration, or press [ESC] at any time to cancel. 
24.5 Wireless LAN Setup 
Use menu 3.5 to set up your ZyWALL 2WE as the wireless access point. 
See the Web configurator parts for instructions on WEP and configuring the MAC address filter. 
If you are configuring the ZyWALL from a computer connected to the wireless LAN 
and you change the ZyWALL’s ESSID or WEP settings, you will lose your wireless 
connection when you press [ENTER] to confirm. You must then change the 
wireless settings of your computer to match the ZyWALL’s new settings. 
From the main menu, enter 3 to open Menu 3 – LAN Setup to configure the Wireless LAN setup. To edit 
the wireless LAN configuration, enter 5 to open Menu 3.5 – Wireless LAN Setup as shown next.