ZyXEL Communications ZyWALL 2 Series User Manual
ZyWALL 2 User’s Guide
34-2
System Maintenance & Information
34.1.1 Command Syntax
The command keywords are in courier new font.
Enter the command keywords exactly as shown, do not abbreviate.
The required fields in a command are enclosed in angle brackets <>.
The optional fields in a command are enclosed in square brackets [].
The |symbol means “or”.
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or off.
34.1.2 Command Usage
A list of commands can be found by typing help or ? at the command prompt. Always type the full
command. Type exit to return to the SMT main menu when finished.
command. Type exit to return to the SMT main menu when finished.
Figure 34-2 Valid Commands
The following table describes some commands in this screen.
Table 34-1 Valid Commands
COMMAND
DESCRIPTION
sys
The system commands display device information and configure device settings.
exit
This command returns you to the SMT main menu.
Copyright (c) 1994 - 2003 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys exit device ether
poe pptp config radius
ip ipsec ppp certificates
cnm radius
ras>