ZyXEL Communications ZyWALL 2 Series User Manual
ZyWALL 2 Series User’s Guide
6-4
WAN Screens
Figure 6-2 Ethernet Encapsulation
The following table describes the fields in this screen.
Table 6-4 Ethernet Encapsulation
LABEL DESCRIPTION
Encapsulation
You must choose the Ethernet option when the WAN port is used as a regular
Ethernet.
Ethernet.
Service Type
Choose from Standard, Telstra (RoadRunner Telstra authentication method), RR-
Manager (Roadrunner Manager authentication method), RR-Toshiba (Roadrunner
Toshiba authentication method) or Telia Login.
The following fields do not appear with the Standard service type.
Manager (Roadrunner Manager authentication method), RR-Toshiba (Roadrunner
Toshiba authentication method) or Telia Login.
The following fields do not appear with the Standard service type.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the user name above.
Retype to Confirm Type your password again to make sure that you have entered is correctly.
Login Server IP
Address
Address
Type the authentication server IP address here if your ISP gave you one.
Login Server
(Telia Login only)
(Telia Login only)
Type the domain name of the Telia login server, for example “login1.telia.com”.
Relogin
Every(min)
(Telia Login only)
Every(min)
(Telia Login only)
The Telia server logs the ZyWALL out if the ZyWALL does not log in periodically.
Type the number of minutes from 1 to 59 (30 default) for the ZyWALL to wait between
logins.
Type the number of minutes from 1 to 59 (30 default) for the ZyWALL to wait between
logins.
Apply
Click Apply to save your changes back to the ZyWALL.