ZyXEL Communications 2 Plus User Manual
Chapter 16 Authentication Server
ZyWALL 2 Plus User’s Guide
326
16.3 RADIUS
Click SECURITY > AUTH SERVER > RADIUS to open the RADIUS screen. Configure
this screen to use an external RADIUS server to authenticate users.
this screen to use an external RADIUS server to authenticate users.
Figure 214 SECURITY > AUTH SERVER > RADIUS
The following table describes the labels in this screen.
Table 92 SECURITY > AUTH SERVER > RADIUS
LABEL
DESCRIPTION
Authentication Server
Active
Select the check box to enable user authentication through an external
authentication server.
Clear the check box to enable user authentication using the local user profile
Clear the check box to enable user authentication using the local user profile
on the ZyWALL.
Server IP Address
Enter the IP address of the external authentication server in dotted decimal
notation.
Port Number
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs
You need not change this value unless your network administrator instructs
you to do so with additional information.
Key
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the ZyWALL.
The key is not sent over the network. This key must be the same on the
The key is not sent over the network. This key must be the same on the
external authentication server and ZyWALL.
Accounting Server
Active
Select the check box to enable user accounting through an external
authentication server.
Server IP Address
Enter the IP address of the external accounting server in dotted decimal
notation.
Port Number
The default port of the RADIUS server for accounting is 1813.
You need not change this value unless your network administrator instructs
You need not change this value unless your network administrator instructs
you to do so with additional information.