ZyXEL Communications 2 Plus User Manual

Chapter 28 SMT Menu 1 - General Setup

ZyWALL 2 Plus User’s Guide

Figure 304   Menu 1: General Setup (Bridge Mode)

The following table describes the fields not previously discussed (see 

To configure Dynamic DNS, set the ZyWALL to router mode in menu 1 or in the 
MAINTENANCE Device Mode screen and go to Menu 1 - General Setup and press 
[SPACE BAR] to select Yes in the Edit Dynamic DNS field. Press [ENTER] to display 
Menu 1.1 - Configure Dynamic DNS (shown next). 

Device Mode

Press [SPACE BAR] and then [ENTER] to select Router Mode.

Edit Dynamic 

DNS

Press [SPACE BAR] and then [ENTER] to select Yes or No (default). Select Yes to 

configure Menu 1.1: Configure Dynamic DNS discussed next.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to 

save your configuration, or press [ESC] at any time to cancel.

              Menu 1 - General Setup

System Name= 
Domain Name= 

Device Mode= Bridge Mode

IP Address= 192.168.1.1
Network Mask= 255.255.255.0
Gateway= 0.0.0.0
First System DNS Server
  IP Address= 0.0.0.0
Second System DNS Server
  IP Address= 0.0.0.0
Third System DNS Server
  IP Address= 0.0.0.0

            Press ENTER to Confirm or ESC to Cancel:

Table 173   Menu 1: General Setup (Bridge Mode)

Device Mode

Press [SPACE BAR] and then [ENTER] to select Bridge Mode.

IP Address

Enter the IP address of your ZyWALL in dotted decimal notation.

Network Mask

Enter the subnet mask of your ZyWALL.

Gateway

Enter the gateway IP address.

First System 

DNS Server
Second System 

DNS Server
Third System 

DNS Server

Enter the DNS server's IP address(es) in the IP Address field(s) if  you have the IP 

address(es) of the DNS server(s).

Table 172   Menu 1: General Setup (Router Mode) (continued)