ZyXEL Communications 2 Plus User Manual

 Chapter 41 Firmware and Configuration File Maintenance

ZyWALL 2 Plus User’s Guide

Figure 394   Telnet into Menu 24.5

1 Launch the FTP client on your computer.
2 Enter “open”, followed by a space and the IP address of your ZyWALL.  
3 Press [ENTER] when prompted for a username.
4 Enter your password as requested (the default is “1234”).
5 Enter “bin” to set transfer mode to binary.
6 Use “get” to transfer files from the ZyWALL to the computer, for example, “get rom-0 

config.rom” transfers the configuration file on the ZyWALL to your computer and 
renames it “config.rom”. See earlier in this chapter for more information on filename 
conventions.

7 Enter “quit” to exit the ftp prompt. 

                      Menu 24.5 - Backup Configuration

To transfer the configuration file to your workstation, follow the 
procedure below:

   1. Launch the FTP client on your workstation.
   2. Type "open" and the IP address of your router. Then type 
      "root" and SMT password as requested.
   3. Locate the 'rom-0' file.
   4. Type 'get rom-0' to back up the current router  
      configuration to your workstation.

For details on FTP commands, please consult the documentation of your 
FTP client program.  For details on backup using TFTP (note that you 
must remain in this menu to back up using TFTP), please see your router 
manual.

Press ENTER to Exit: