ZyXEL Communications 2 Plus User Manual

 Chapter 42 System Maintenance Menus 8 to 10

ZyWALL 2 Plus User’s Guide

The following table describes the fields in this screen.

The ZyWALL’s Real Time Chip (RTC) keeps track of the time and date.  There is also a 
software mechanism to set the time manually or get the current time and date from an external 
server when you turn on your ZyWALL. Menu 24.10 allows you to update the time and date 
settings of your ZyWALL. The real time is then displayed in the ZyWALL error logs and 
firewall logs. 
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next. 

Figure 418   Menu 24: System Maintenance

Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the 
time and date settings of your ZyWALL as shown in the following screen.

Table 217   Call History

Phone Number The PPPoE service names are shown here.

Dir

This shows whether the call was incoming or outgoing.

Rate

This is the transfer rate of the call.

#call

This is the number of calls made to or received from that telephone number.

Max

This is the length of time of the longest telephone call.

Min

This is the length of time of the shortest telephone call.

Total

This is the total length of time of all the telephone calls to/from that telephone 

number.

You may enter an entry number to delete it or ‘”0” to exit.

      Menu 24 - System Maintenance

 1.  System Status
 2.  System Information and Console Port Speed
 3.  Log and Trace
 4.  Diagnostic
 5.  Backup Configuration
 6.  Restore Configuration
 7.  Upload Firmware
 8.  Command Interpreter Mode
 9.  Call Control
10. Time and Date Setting
11. Remote Management Setup

    Enter Menu Selection Number: