ZyXEL Communications 2 Plus User Manual

Chapter 2 Introducing the Web Configurator

ZyWALL 2 Plus User’s Guide

Click Port Statistics in the HOME screen. Read-only information here includes port status 
and packet specific statistics. The Poll Interval(s) field is configurable. 

Figure 10   HOME > Show Statistics

The following table describes the labels in this screen.

LOGS

View Log

Use this screen to view the logs for the categories that you 

selected.

Log Settings

Use this screen to change your ZyWALL’s log settings.

Reports

Use this screen to have the ZyWALL record and display network 

usage reports.

MAINTENANCE General

This screen contains administrative.

Password

Use this screen to change your password.

Time and Date Use this screen to change your ZyWALL’s time and date.

Device Mode

Use this screen to configure and have your ZyWALL work as a 

router or a bridge.

F/W Upload

Use this screen to upload firmware to your ZyWALL

Backup & 

Restore

Use this screen to backup and restore the configuration or reset 

the factory defaults to your ZyWALL. 

Restart

This screen allows you to reboot the ZyWALL without turning the 

power off.

Diagnosis 

Use this screen to have the ZyWALL generate and send 

diagnostic files by e-mail and/or the console port.

LOGOUT

Click this label to exit the web configurator.

Table 6   Screens Summary (continued)

Table 7   HOME > Show Statistics

Port

These are the ZyWALL’s interfaces.  

Status

For the WAN and dial backup ports, this displays the port speed and duplex setting 

if you’re using Ethernet encapsulation and Down (line is down), Idle (line (ppp) 

idle), Dial (starting to trigger a call) or Drop (dropping a call) if you’re using PPPoE 

encapsulation. Dial backup is not available in bridge mode.
For the LAN, DMZ and WLAN ports, this displays the port speed and duplex setting.