ZyXEL Communications 2002 User Manual

Page of 168
P-2002 Series User’s Guide
44
Chapter 4 Ethernet Screens
4.3  Configuring the Ethernet Management Port
Click ETHERNET in the navigation panel and then Mgnt Port to open the following screen. 
Use the ETHERNET Mgnt Port screen to configure a static IP address through which you 
can manage the Prestige. 
Note: The management port is a separate logical Ethernet interface that you can 
access from a computer connected to either of the Prestige’s physical Ethernet 
interfaces. 
Figure 13   ETHERNET Mgnt Port
The following table describes the labels in this screen.
Note: The management port’s subnet mask is fixed at 255.255.255.0.
Table 9   ETHERNET Mgnt Port
LABEL
DESCRIPTION
IP Address
Type the (static) IP address through which to manage the Prestige. This 
management IP address can be on a different subnet from the Ethernet port’s IP 
address, but the computer you use for management must be on the same subnet 
as this management IP address.
Apply
Click Apply to save your changes back to the Prestige.
Reset
Click Reset to begin configuring this screen afresh.