ZyXEL Communications 4528F User Manual

Chapter 9 VLAN

XGS-4526/4528F/4728F User’s Guide

Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) 
settings on a port. See 

 for more information on static 

VLAN. Click the VLAN Port Setting link in the VLAN Status screen.

Figure 42   Advanced Application > VLAN > VLAN Port Setting 

Control

Select Normal for the port to dynamically join this VLAN group using 
GVRP. This is the default selection.

Select Fixed for the port to be a permanent member of this VLAN group.

Select Forbidden if you want to prohibit the port from joining this VLAN 
group.

Tagging

Select TX Tagging if you want the port to tag all outgoing frames 
transmitted with this VLAN Group ID.

Add

Click Add to save your changes to the Switch’s run-time memory. The 
Switch loses these changes if it is turned off or loses power, so use the 
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.

Clear

Click Clear to start configuring the screen again. 

VID

This field displays the ID number of the VLAN group. Click the number to 
edit the VLAN settings. 

Active

This field indicates whether the VLAN settings are enabled (Yes) or 
disabled (No). 

Name

This field displays the descriptive name for this VLAN group. 

Delete

Click Delete to remove the selected entry from the summary table. 

Cancel

Click Cancel to clear the Delete check boxes.

Table 18   Advanced Application > VLAN > Static VLAN  (continued)