ZyXEL Communications 4528F User Manual

Chapter 18 Port Authentication

XGS-4526/4528F/4728F User’s Guide

Use this screen to activate IEEE 802.1x security. In the Port Authentication 
screen click 802.1x to display the configuration screen as shown. 

Figure 81   Advanced Application > Port Authentication > 802.1x 

The following table describes the labels in this screen. 

Table 44   Advanced Application > Port Authentication > 802.1x 

Active

Select this check box to permit 802.1x authentication on the Switch.

Note: You must first enable 802.1x authentication on the Switch 

before configuring it on each port.

Port

This field displays a port number. 

*

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all 
ports. Use this row first to set the common settings and then make 
adjustments on a port-by-port basis. 

Note: Changes in this row are copied to all the ports as soon as you 

make them.

Active

Select this checkbox to permit 802.1x authentication on this port. You 
must first allow 802.1x authentication on the Switch before configuring it 
on each port.